1. Plug the power adapter into an electrical outlet and hold the power button (on the top-left side of the iPad) until it powers on.
   Note: If the iPad is connected to a cellular network, skip to step 2.
2. On the home screen, tap the settings icon and locate the Wi-Fi settings (on the left side of the screen).
   
3. Make sure Wi-Fi is enabled, then select the name of the Wi-Fi network you want to join.
   
4. Enter the password for the network, then tap Join. If the Join button can't be tapped, the password entered is incorrect.
   
5. When the iPad has successfully joined the network, you see a next to the network and ain the upper-right corner of the display. If you do not know the password to the Wi-Fi network, please contact your network administrator for assistance.

1. Connect the AC power cord to the printer and to the AC adapter. 
   
2. Plug the power cord into a grounded power outlet.
   
3. Once the printer is powered on, it should automatically pair to the iPad via Bluetooth. The QL820-NWB printer should have a solid Bluetooth logo on the top right corner of it’s screen to indicate that it is paired with the iPad. No further configuration should be necessary. 
   
4. Please send an email to onboard@ilobby.com if you need any further assistance with printer setup. Note: Please refer to the appropriate printer configuration guide for instructions on using other connectivity methods for the printer.
   

Once the printer and the iPad have been configured, you can enable Guided Access mode on the iPad. This locks the iPad to the iLobby application and prevents unauthorized users from exiting the app, changing settings, or turning off the iPad. 

Please refer to the following article for instructions on how to enable Guided Access mode: https://help.ilobby.com/portal/en/kb/articles/setting-up-guided-access-on-your-ipad